Will these jigs work with a cabinet that needs slide a rear drawer slide hanger installed? Did not see this application in the video.

No, don't buy these they are glorified framing squaren speed square or rafter Square's . Simply clamp bottom of Rafter Square's to face of cabinet 1/4 inch higher than bottom of drawer measurement. Screw it in your done. You can buy a rafter Square for a few bucks at harborfreight.com. Surprise they even have pocket hole jigs. Common mistake is that the Kreg Jiggs ARE THE only options for pocket holes & other items when in fact there has been similar if not identical devices for years and years at far cheaper rate.

How do you use this for the bottom drawer in a box?

Hello Wilber,Mounting Drawer-Slide Cabinet Members*Place a ¼" 6mm-thick, 1½" 38mm-wide spacer board that is as long as the drawer slide between the bottom of the cabinet and each drawer slide.*For overlay drawer fronts, follow the drawer-slide manufacturer's instructions for the slide setback distance from the face of the stile (for face-frame cabinets) or the front edge of the cabinet side (for frameless cabinets). For inset drawer fronts, add the thickness of the drawer front.* Using the vertical mounting slots in the drawer-slide cabinet members as guides, drill pilot holes and screw the cabinet members in place.INSTALLING A DRAWER AT THE BOTTOM OF A CABINETUnder-mount Drawer Slides*Follow the drawer-slide manufacturer's instructions for installing the drawer membersThank You,Josh

Do these work well without the kreg clamps shown in the pictures and video?

I don't like using the Kreg clamps with these jigs. Too hard adjusting them just right and then getting them in the right place. It's way easier to use a one-handed "squeeze" type bar clamp like the Irwin: https://www.amazon.com/IRWINQUICK-GRIPOne-Handed-Mini-Clamp-Pack-1964745/dp/B001NP9S7M/ref=sr_1_7?ie=UTF8&qid=1504218775&sr=8-7&keywords=bar+clamps I actually use clamps I got at Harbor Freight for $4 each.

Can this jig work for drawers with slides mounted 2.25” from bottom of drawer?

Yes it can, the mfg wasn't thinking in 2 dimensions. Just flip the jig 180 in the horizontal plane, that is turn it upside down, you may need another clamp to hold the drawer slide or you can hold by hand, the important thing is that the slide is 90 dg to the front which it will be weather the jig is above or below the slide!

Desertcart Logo

Deliver to French Polynesia

For best experience Get the App

DOWNLOAD THE APP

WE SOURCE ITEMS FROM

UAE
UK
India
USA
Japan
KOREA

Customer Services

About Us

Customer Support

Description

🛠️ Nail perfect drawer slides every time — no measuring, no hassle!

TOOL FREE POWER - Hand-powered design means zero reliance on batteries or external power sources.
COMPACT LIGHTWEIGHT - Weighing just 522g and measuring 40.64 x 14.61 x 10.16 cm, it’s easy to handle and store.
SPEED UP YOUR WORKFLOW - Install drawer slides faster with a jig designed for repeatable, no-measure setups.
FLAWLESS FIT EVERY TIME - Built-in indexing tabs guarantee perfect drawer slide alignment without guesswork.
PROFESSIONAL GRADE FINISH - Under-mount mounting type ensures sleek, seamless drawer operation for a polished look.

The KregDrawer Slide Jig is a precision hand-powered tool designed to simplify and speed up the installation of under-mount drawer slides. Featuring built-in indexing tabs for flawless alignment, it delivers consistent, repeatable results without the need for measuring or marking. Compact and lightweight, this jig is a must-have for professionals and DIY enthusiasts aiming for smooth, perfectly fitting drawers every time.

Reviews

M**H

Make an awkward job easy.

These are great and allow you to line up the runners and then the drawer - follow the instructions (there are several youtube videos as well, just search for Kreg Drawer Slides) and the job is done easily and accurately. Because they hold the runner and drawer in place whilst you put in the screws in it really does take away the hassle of lining up.

6.09.2017

M**N

Tough product very sturdy

Great peace of kit very accurate on draws

2.11.2019

S**D

Good product!

It does what it says! Good buy!I’ll definitely recommend to anyone else.

21.08.2019

R**S

SUBSTANCIAL BUILD QUALITY IS WHAT YOU WOULE EXPECT FROM KREG

SUBSTANCIAL . BUILD QUALITY IS WHAT YOU WOULD EXPECT FROM KREGGREAT PRODUCT.

3.03.2018

D**R

Practical

Very practical for drawer instalation. Makes the job so simple.

15.07.2020

G**Z

Top drawer jigs

Well made but couldn't use as to long for my drawers

21.11.2018

D**O

Value for money

Brilliant easey to use too

13.11.2019

P**N

Drawer fitting made easy.

Accurate, consistent, easy to use.

21.06.2019

Common Questions

Are the products genuine and authentic?+

Yes, all products are sourced directly from authorized retailers in the US, UK, UAE and India. We maintain strict quality control processes and verify each product before shipping. All items come with applicable manufacturer warranties and are covered by our standard return policy.

How long does delivery take and is it reliable?+

Delivery times vary by destination country, typically ranging from 3-9 business days. Each order is fully trackable through our system. We handle all customs clearance and use reliable courier partners for last-mile delivery. You'll receive regular updates about your order status via email and our app.

What is Desertcart? Is it safe to order from?+

Desertcart is an international e-commerce platform operating since 2014. We securely process thousands of orders globally each day. Every product goes through our quality verification process before delivery, and we provide end-to-end order tracking, 24/7 customer support, and a comprehensive returns policy to ensure a safe shopping experience.

How is product pricing calculated?+

Our prices include the product cost, international shipping, import duties, customs clearance, and local delivery charges. We handle all customs and import procedures, ensuring there are no hidden fees upon delivery. PRO members receive additional benefits including free shipping.

15182F

Duties & taxes incl.

French Polynesiastore

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

ChatGPT - opens in a new tab Perplexity - opens in a new tab Claude - opens in a new tab Grok - opens in a new tab Google AI - opens in a new tab

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Zainab N.

Fantastic and great service. Shipping was faster than expected.

1 week ago

Ayesha M.

The product exactly matches the description. Very satisfied with my purchase.

5 days ago

View all Trustpilot reviews

Mounting type	Under Mount
Manufacturer	Kreg
UPC	647096806644 647096807337 735090165024
Global Trade Identification Number	00647096806644, 00647096807337, 05024763174193
Number of items	1
Part Number	KHI-SLIDE
Product Dimensions	40.64 x 14.61 x 10.16 cm; 521.63 g
Item model number	KHI-SLIDE
Style	Drawer Slide Jig
Finish	Unfinished
Thickness	4 Inches
Power Source	Hand Powered
Item Package Quantity	1
Number of Pieces	1
Measurement System	Metric
Included Components	1x jig
Batteries included?	No
Batteries Required?	No
Item Weight	522 g

KREG® Drawer Slide Jig

Details

Description

Specifications

Have a Question? See What Others Asked

Reviews

Common Questions