Motor Carbon Brushes Pair for Beko Washing Machines/Washer Dryers (Replaces 371202407, 371202410, 371202402, 371202405)

Worked perfectly! Fixed the washing machine

Got our 10+ year old WM6123W machine spinning like new. Our model wasn't listed but, it works perfectly with this older model. Saved ourselves alot of money and as with other reviews it is straight forward and takes about 15 minutes.Update - after 3 months the sound of worn brushes started again and the machine stopped spinning. Asked for replacements and supplier said no. The part fits perfectly but, they say they can't replace as not listed. Don't buy, if not listed, even if they will fit. Learn from my mistake and check with the supplier first. Still maintain the 5 stars.

Easy to use no problems

Received 2 days after order placed.Different colour than original brushes, otherwise exactly the same,Tips regarding replacing the brushes below;Having watched numerous YouTube videos regarding replacing these brush s, I have to say the methods are wrong,The EASY way to replace these brushes is to:1 isolate the electric supply.2 remove the detergent drawer (this is important).3 pull out the machine and turn it onto its left hand side,This makes it possible to access the brushes attached to the motor from the bottom of the machine,No need to remove the back panel, belt and/or motor.What is needed is a short Phillips screwdriver to replace the brushes.It is essential to remove the detergent drawer to stop its contents spilling onto the electronics of the machine when ripped over.I had enough slack on the water inlet and waste pipes, hende removal was not necessary.Good luck

Bought these for a Beko WM 74135 W. Worked perfectly. I removed the motor to facilitate easier brush replacement but it is possible to do without removing the motor. (Just a bit more awkward to position the washing machine for access). So far so good, no idea if these will last as long as the original ones, only time will tell I guess. As others have mentioned, when newly installed, the motor will make a kind of a whining sound, but this is normal and over time quietens down (Think its the new brushes 'bedding in'). Word of warning, wear gloves as the dust from these that will inevitably be all over the old brushes (and the surrounding motor) it nasty. Easy DIY fix for anyone with any basic DIY/Electrical knowledge. I did need quite a long extension and Torx bits to remove the motor, so ensure you've got those before attempting to do this.

Just purchased the 2nd Set due to the next day delivery and needing the washing machine. 1st set purchased in July 22. Washer packed up again last day of October. Quick strip down reveals the Left hand brush had failedThese will fall apart in your hands unless you keep the elastic bands on until you have both screws in which isn't ideal. After studying the 2nd Set of these I've had within 6 months it's quite obvious they are a set of 2 right hand side brushes, not a pair for left and right. So it fits on the left hand, but the brush is at completely the wrong angle and the motor just chews up the brush. Ok for a quick fix until you can wait the 7 to 10 days for the genuine ones to arrive. For a tenner cant really complain. If it was a pair of left and right and not just 2 x right I'd have left a 5 star review. So just bear in mind these will let you down at the most inconvenient moment because whoever at the factory didn't spot a simple mistake

I have purchased 2 sets of these in a short time the first set lasted about a week and had to strip it back down and one of the brushes had melted so had to put one of the original ones back in then it lasted a few weeks and when again so ordered another set and they have lasted 3 washes and they have melted again

Correct part:other part ordered from FindaSpare on Amazon was angled wrong so had to return.