Barnes and Ivy Rosslyn Rustic French Country Swing Arm Wall Lamps Set of 2 Bronze Plug-in Light Fixture Faux Leather Bell Shade for Bedroom Bedside House Reading Living Room Home Dining

This lamp is a bargain. i like the arm swivel and the dimmer. i will say, the dimmer interferes with my radio, which plugged into the same outlet, to buzz.

We needed light around our living room couch but have no room for end tables. We decided to hang wall lamps rather than hire an electrician to install wall sconces. These look a little less elegant in person than in the photos (the two tone has just a bit too much contrast), but they were the closest we could find to the traditional bronze look we were going for on our budget. The first box included a lamp with a swing arm that was too loose. We couldn't figure out how to tighten it, so we bought a second set of two intending to pick out a better lamp and send back the loose one (plus the other spare). That worked fine, but when we tried to set up a return, we got the refund but no return label. So we donated the extra lamps.

We liked the lamps, just what we wanted. They work as reading lamps. Easy to install.

A lamp of this type should have the attachment to the wall vertical, in the direction of the pull of gravity. If you want a tight fit on the wall use the four smaller holes on the wall mount.

I didn't care for the very ornate sconces that were in the master bedroom, so I bought these and had my electrician replace my sconces.

I purchased back in September and just got the chance to install during my end of year holiday! any case we love the style and it was only 25 minutes to install both, the only disappointment to give this product 3 stars and would have given it 5 stars if the shade was poorly made of some type of vinyl that I would not consider very safe, so I would only use bulb in my opinion but always follow the manufacturer instruction. Out of the box with one bad shade as the other one was also poorly made but manageable. It is too late to ask for replacement shade so all on us not checking it at the time of purchase. Another note, the lamp arm is hard to swing ! not an issue, just find a way to use WD40 at the joints and all good, that way you do not rip out of the wall if not nailed to a wall stud. Thx-

The media could not be loaded.  The lamps I purchased were fine when they were installed. But after a few months the shades receded from the frame. When I called about replacement parts there are none. So I have to buy new lamps or find two new shades instead of one. This is very disappointing. Very poor quality and workmanship.

Pretty But FlawedThe lamps are pretty. I like the antique finish.PROS:- Came quickly- Packaged well- All parts included- Nice burnished bronze antique look- Dimmer switches- Standard lightbulb size- Lampshades not flimsy material - they're linedCONS:- Not worth $100 in my opinion- This is not actually a "set", but rather two of the same lamp in a box (this is known because the lamp switch/dimmer switch is on the same side of the lamp on both lamps. If it were truly a "set", the switch/dimmers would be on opposite sides on each lamp. Example, on my husband's side of the bed, the switch/dimmer is closest to him in bed. On my side, it's around on the other side of the socket. So, I have to reach around awkwardly to turn it on or off.) There is no way to change the positioning of the lamp switch/dimmer. It is in fixed position.- The harp on one was bent. Had to try to bend it to shape so the shade wouldn't look like it was setting on it crooked.- The "anchor screws" that come as part of the installment package are crap. Super weak, cheap and ineffective. After mounting the first lamp to the wall with these anchors, the lamp almost fell out because they didn't really anchor correctly. Thankfully, I had my own GOOD anchor screws and was able to use them instead.- The design is flawed. The backplate doesn't sit flush against the wall. Even with the screws being anchored into the drywall 100%, the backplate will not sit flush against the wall. There is 1/4 - 1/2" space between the backplate and the wall.- Additionally, there are two screws mounted (studs) on the backplate that stick out in front. You are to position the lamp onto these studs, then tighten cap nuts on the front of the lamp. These screw mounts / studs are longer than the depth of the backplate. Ergo, even when you screw the cap nuts all the way on, there is 1/4 - 1/2" space between the backplate and the cap nuts. This also keeps the lamp from feeling secure.- Though I was able to get the lamps installed, by the time I was finished and realized that they simply were not going to mount correctly, I was too annoyed to go through the hassle of taking them down and returning them. So, we'll use them until they pull out of the wall completely.- The arm that is supposed to be swingable, was VERY stiff on one of the lamps. I couldn't even move it, and had to get someone else with more muscle to pull it apart. Thus, it will stay in it's current position, as it does not want to move / swing.I'm attaching some pictures so you can see how the lamp won't mount flush to the wall, and the gap between the mount screws / lamp studs and the cap screws.I'm not a handyman by any means, but I do a lot of work around the house. I've never been intimidated by a task and was not by this one. BUT, I do know enough about a thing or two to know that this lamp isn't right.

These lampshades are stunning. The give a rich faux antique look.Easy and quick to install too.

Product is a pleasant surprise- easy to install tall

Ideal and extremely fast sevice