GDHXW X-884 Pressure Washer Gun Foam Cannon 5 Nozzles 2 Conversion Adapter Cleaning Gloves,for Pressure Washer

Works pretty good. Not as much foam but I'm sure that I need to try different setting or soap to get more foam.

I am impressed! No more bucket and brush. Get all the soap on at once. Used Rain X high foaming concentrate ($8 bucks for a big jug) diluted about 1 soap to 10 parts water. First get the car wet and get as much of the dirt rinsed off with the yellow pressure tip.. Then plug in the foam attachement and adjust to get the foam consistency you want. Expect to use a whole bottle of your diluted mix on the car. Love the pistol grip vs the traditional wand for ease of use - much more control! Then use the supplied wash mit to scrub your vehicle. Then switch back to the yellow tip and rinse. Be careful not to get too close to your paint using the yellow tip, but for wheels and tires close is not a problem…or you can just use a less aggressive spray tip like the white one. NEVER use the red tip on a car! Last, for those who may not know…try to do this in the shade on cool paint. You do not want to let the soap dry on the vehicle before you can rinse it off.. Other wise just wash half and half or sections at a time and rinse.

This is my 1st foam cannon and am pleased with it except the top of the bottle is small and makes filling the bottle difficult unless you have a funnel handy. A worthwhile purchase and is quick and easy to assemble with quick connects on it. Lightweight and easy to use. No real instructions come with it but the video on Amazon makes it easy to understand. If you wash your car often, This is the way to go. I will be buying microfiber towels and maybe some Formula 4 spray wax to aide in less water spots.

The foamer is great, and the quality of the spray gun was much better than my original one that was pretty good.Considering you get the spray gun, foamer, nozzles and the car wash mitt, you can't beat the price.I'll be doing car washes in my driveway for at least 2-3 years with this set-up.

Suction tube kept falling off during washing.Update-After evaluating my first use of GDHXW X-884 Pressure Washer Gun Foam Cannon, I came to the conclusion that using hot water with the soap warmed the tube causing it to come for at the high setting. Foam Canon worked excellent, made washing my truck much easier.

The only way we could get the GDHXW Pressure Washer Gun Foam Cannon to work was to hold it upside down. It made incredible foam and worked like it should. But, the upside down position made it extremely hard to use.

You get a nice bundle of stuff for the money and I will start by saying the bottle and gun are more convenient than what you’d normally get with your pressure washer, as far as washing a smaller car. However, there are some issues worth noting. First the O-rings my gun came with had already broken during my second use with the product. Luckily my pressure washer came with additional rings but now one of them is used for this gun. The nut that attaches the quick attachment for your nozzles as well as the nut near the hose connector on the bottom of the gun constantly come loose. These will need more than a hand tightening which I don’t think is acceptable for a fresh out of box product that has only seen two light uses. Another issue I found is that anytime I disconnect my hose it wants to take that bottom connector with it instead of just unscrewing from my gun, leaving the connector attached. I think if I take a wrench and disconnect it from the hose end and reattach and re-tighten everything on the gun correctly it will all, hopefully, be settled. The trigger lock also broke off and is now floppy and loose when reattached. The foam cannon adjuster is also backwards, I found that twisting it to the “less soap” is what gives you the most soap. I found this somewhat humorous considering I had it maxed out (or so I thought at the time) and notice it was barely shooting any soap out and I never thought to try turning it the opposite direction until I had literally checked everything else that could have been wrong. The nozzle adjustments are also either a jet stream or a massive “spray everywhere” setting with little to no adjustments in between. If you want a spray thats not a jet stream or a massive wedge, you have to very carefully adjust the nozzle and just watch how it comes out and hope you don’t turn it a tad more than it needs to be. When it all works, it works well but that’s WHEN. It all feels cheap but then again the entire thing is fairly cheap all things considered. The nozzles and mitt are the most solidly put together parts of this package of which I have yet to have any trouble with. All in all I’d say it’s better than buying an overpriced foam cannon with a Chemical Guys label slapped on to it. Everything bundled together is nice and convenient and the extra nozzles are a great deal. Just be sure to have some Teflon tape handy to keep any threads from possibly leaking, have some extra o-rings handy and have a wrench on hand, luckily all potentially needed fixing is cheap and/or free. It just shouldn’t be needed regardless.

exelente producto y calidad, lo recomiendo

Bonne qualité prix et robuste fait la job

Washing the car got a whole lot easier.I'm looking forward to washing my car all the time now, it puts out all the suds. it's awesome to watch it foam all over the car.