Eternal Jewelry Coating, Clear Protective Polish-on Sealant to Protect and Shield Metal and Stone Jewelry from Tarnish, Wear and Prevent Allergies .5oz (Single Unit)

10 stars! Read the instructions!! I couldn't be happier with my renewed favorites. I used this on hundreds of pieces with great results using household items. The smell is similar to nail polish but surprisingly not super strong. I was able to use it for several hours at a time indoors. I can't see any streaks on the items. 1 Used a small ultrasonic cleaning machine with dish soap to degrime. Keep doing it until water remained clear. 2 Used an old head on my sonicare toothbrush to scrub crannies. If necessary use acetone to remove paint etc. or sterling cleaner to make it absolutely clean. Repeat step 1. Rinse completely. 3 WEAR GLOVES Throughly dry. I have a small 600 watt "shop" corded blower basically a mini leaf blower. Waay more effective than the hair dryer without getting the room hot and glued parts on the pieces from getting soft. Hang item from a cork board with a tack so it hangs freely. Paint item completely touching as little as possible. I didn't notice any difference based on the amount I gobbed on. The extra buffs off- no point wasting it. . Wait between 10 minutes and an hour, again no noticeable difference. 4 STILL WEARING GLOVES Used a second dry toothbrush head to buff off excess. Repeat wash and dry. ! Everything is like new or better. I didn't do a second coat on any item. I used it on sterling, surgical, stones, turquoise, wood, glass, ceramic, shells. I did not do this with gold, pearls, platinum, or cheap crap.

I felt the need to write this review bc it seems there is alot of confusion in this product, specifically application process and how long to leave it on your item. I used this on several pieces on my 2 micron gold plated jewelry pieces and application went very smoothly. Seem to fill in a few blemishes in the gold plating and previous clear coating chipping. I can't speak on the full quality and longevity of it just yet. But it seems their number 1 complaint is application. 1) CLEAN YOUR ITEM THOROUGHLY! 2) Use blue polish rag to buff out (gently) remaining tarnish or blemishes (must remove all dust, dirt, finger prints, everything. If you are lazy with this step, your finish product will show it) 3) It comes with an awesome top brush on, think nail polish brush. Brush on a LIGHT FIRST COAT! One of the biggest complaints I've noticed is ppl complaining about a white residue or thick finish coat they can't buff off. This is not suppose to happen if you apply correctly. Again, think apply nail polish. DO NOT load the brush with excessive product. Paint on lightly, remove excess as you blend. This is very important. What happens when you goop on to much nail polish and not remove excess before it dries? It looks awful! 4) Drying time. I wasn't sure how long to let it dry for so I emailed the seller to confirm some info. This seems to be the other missing link that caused complaints. Yes, the longer you leave the product on to cure does give you a thicker result. Recommended dry time is 5 - 60 minutes depending on your item. I left mine on any where from 10 minutes to over an hour (accidentally) and it was still not dry. But you DO NOT want it to dry/harden on your item. You want it to cure. Difference. So yes it was still wet every time I went to polish off (gently). I'm not sure where others got the impression to goop on excessive product to their items then let dry over night? This product goes a long way, use the least amount as possible. You can reapply additional coats easier with more control way easier than it will be if you hastly goop on a ton of product on the first coat hoping to cut corners. That is your mistake, not the sellers nor product fault. 5) Use white polish rag to shine up, GENTLY. Until you know how your item is going to respond to this product, all applications and steps to be done with soft hand. That should be a no brainier. Once you polish off the product to satisfaction, that is when it is dry. HOWEVER, I would not recommend wearing (if jewelry) for a full 8-12 hours just to be safe. Long story short; no gooping on excessive product, no leaving the product on longer than 60 minutes. No crying in baseball. This is just my honest, paying customer review bc I absolutely hate ppl who leave poor reviews on products that they don't understand or know how to use.

I think this product is pretty solid. Packaging was cute, the product is easy to use. As far as the other reviews saying the product left a white film on jewelry is KINDA FALSE. When I put the product on AS ADVISED and waited the five minutes to then you wipe off any remaining product... It worked great!! However I did have quite a few pieces of jewelry I had to coat overall and i got lazy lol and started moving faster and would pile on and even dip some jewelry in the coating to save time. That combined with me not wiping it off after 5 to 10 minutes because I was multitasking, it did eventually harden up and when I would curve my chains etc. just as they regularly do on your body, they were kind of stiff and the coating would crack a bit and turn white ish. BUT that ONLY happened when I didn't use the product as directed, I rushed for my last few pieces and that was my fault. But my first pieces came out great. As far as a solution for the “white coat” just get a hand towel or a regular towel and just run your jewelry in between your fingers holding the towel, for bracelets just shine them like your shining shoes! It rubs off NO PROBLEM. After I rubbed the excess off I lightly coated and wiped off as instructed 😂 and its great! As far as how the product actually protects your jewelry, I am not too sure. But I did see so many people comment complaining about this and I wanted to help set that record straight. SOLID PRODUCT so far.

I love it! I bought a new water-resistant women's watch, a small lightweight one to wear for summer. As soon as the back of the case touched my skin, the metal ions oxidized the oils, causing that nauseating "metallic" odor that you get when you handle pennies. Since skin is always producing oils, washing my wrist only helped for 2 minutes. I threw it in a drawer while I tried to figure out how to deal with this problem. I discovered that it was just the back of the case, which is supposed to be stainless steel, that was giving off ions; this was easy to determine by simply touching each area of the watch to see if it cause a smell. The first step on the instructions provided further information, since only the case backing produced any tarnish on the cloth provided to prepare the metal for coating (just barely touching the clean-looking metal turned the cloth black!). The process took a few days. Each day I put on one coat, polished it off after 10 minutes, then cured for 24 hours as directed. The smell was diminished after the first coat, but still intolerable. So the whole process took 5 full days because I needed 5 coats to solve the problem. And solved it is! The instructions declare that people with allergies might need multiple coats to defend themselves from their jewelry, and that they might need to add new coats over time. I expect that I will fall into this camp, since I'm trying to deal with an aesthetically revolting reaction between the watch and the oils on my skin. If my wrist starts to stink again I'll update this review to let you know how long it took to wear off the coating.

I tried with this stuff. I really did. maybe my expectations were too high. I've developed what seems to be a zinc allergy in the past few years, and can't wear most of my chains and brass pendants without my skin going to angry red patches and welts. i was hoping for something to protect my skin from that and protect the pieces themselves from tarnish, despite my habit of wearing them in the shower. what actually happened was (as a previous reviewer mentioned) i followed the instructions to the T. I spent 2 hours cleaning off all my pieces, scrubbing all the tarnish off with a toothbrush and toothpaste, even going so far as buying an ultrasonic cleanser to make sure they were absolutely clean, having a great time buffing them till they gleamed with my roommate's dremel tool. followed the instructions to the T, laid on thin even coats, hung them up to dry for about 15 minutes, buffed and reapplied, rinse and repeat a few times... no go, my copper bracelet was turning green again after a couple of days. "okay," I thought, "maybe you do have to apply it thicker for a tough coating" attempt #2, I went so far as to disassemble my copper bracelet to clean and dip each part of it in the stuff. I laid it on quite thick on my other pieces (which is tricky, as the stuff IS absolutely clear, makes it a little hard to see where it's been applied, but I can't fault them for that one) let it set for the max time of 30 minutes, buff off, repeat at least 3 times. there were definitely solid plugs in the holes of the bracelet, so SOMETHING was being layered on, i thought. no dice. my neck was breaking out in hives again after 3 days of wearing a pendant. I give up. maybe i'm doing it wrong, maybe florida's heat damaged the product, maybe I got a bad batch. either way, this stuff just isn't working for me. then again, i've also managed to have issues with nailpolish clearcoat. i'm beginning to think I should just look into plating all my pieces in silver instead.

I have found this product not to work. Also liquid in the cap dries up and leaks too. Once I opened the product I could no longer place the bottle back in the box laying down because it leaked. On top of that the product dries up and I have to use a plier to pry it open. I don't think it does what I expected it to do and I do not recommend this product.

My wife-to-be and I ordered rings for our engagement/wedding, and after we got them, we learned something bad: she’s sensitive to the copper in rose gold! Our rose gold galaxy-inlay rings were causing blisters, itching, and flaking skin, so we had to wait for her to heal before we could put any rings on her hand. With our wedding literally weeks away by the time she healed, we wanted something simple and invisible, but stronger than clear coat nail polish. We gave this a whirl, and I can’t overstate how happy we are with it! It saved the day! The ring hasn’t given her issues at all, even after a week of wearing it. The resin inlay and the ring both look as beautiful as the day we got them, too! NOTE: You HAVE to follow the instructions on this. It took me a full week to get the ring ready, but it was totally worth it. Thin coats, and I only let it dry for about 30 minutes before polishing it and then waiting 24 hours to finish curing. If you follow the instructions, your ring will be perfect!

This is the best product so far. It take much longer the dry. I plan a day to make this my project. I am not too sure but it seem like it took longer than 24 hrs depending on how you apply the product. I started on a Friday evening and by Sunday evening it was dry. I turn my jewelry on the opposite sides and do the same. I actually left it out for a few days and it cured very well. I wipe off as directed and I stored away in my clear top jewelry box and some I placed in the small zip lock bags. I did however used more than one coat but you must allow the first coat to dry. I was afraid to use it on my gold tone jewelry as it looked a little dull but once it dried and I polished it with the clothes it looks great. I think if you want this to work it is not a quick fix. You must let your jewelry dry. On jewelry that are smooth surface you can use a make up sponge. I use a sponge on most of my jewelry and you can wash the sponge off and let it dry if you want to reuse it.