darkFlash Full-Tower ATX Gaming PC Case, Back Plug-in Motherboard, Dual-Chamber, Panoramic Glass, Up to 2 x 360mm Radiators, RTX 40 Compatible(DY470) (1 PWM ARGB Fans, Black)

The media could not be loaded. This is my first time using a product from this company. I researched for months for my build which is the top of the line everything. I didn’t want to skimp on the case, I wanted a case where I could hide the psu and cables easily. I wanted a case with a unique fan appearance if possible, I actually didn’t think it was possible. After much consideration I chose this case, the fact the reviews all mention high quality materials, glass, arrangement and fans was a big factor in my decision.The good-This case is large, perfect for a build that includes the 9950x3d cpu and a 5090 gpu. Plenty of space for everything without being cramped.-this case comes with one or four fans. I would like to have had the option of 7 fans but getting 4 is still a bonus compared to most other cases.-this case comes in white or black, and the fans match. I was going to do a white build but lack of available parts in white and the fact I really liked this cases looks black, caused me to lean towards the black version.-the layout is perfect. It has a place to mount the psu sideways so you can easily access your psu plugs and cables. It has routing ties and plenty of access holes to route anything, anywhere. It has room for a single 120 fan on the back, 3 on bottom, side and top which is a total of 10 fans. This allows for easy fan and/or radiator installation as well as utilizing directional fans so you have bottom and side pulling in cold air and the back and top putting out hot air.- additional facts on the psu mount. The fact the psu is mounted in a separate section not only allows it to pull in cold air from the side but also prevents hot air from going into the case. This is a legit problem with cases where the psu is in the primary section on the bottom of the case. The cables excess wiring is able to be kept in this section, out of sight and also not hindering air flow for the components. This is a huge plus for rigs that produce heat like mine does.-motherboard mount is simple, and allows cables from all components to run behind the motherboard in the separate section so again, no wire clutter to look at or reduce heat dissipation. You only use a few inches to plug into the motherboard. There are access holes all the way around so you route the cables in the separate section and only bring in enough of the wire to effectively plug it in. This is the cleanest install I ever experienced and I have built a lot of rigs in the past 24 years.-the fans are unique not only in their look but they also utilize a proprietary connection method. This may make some people nervous but for complex high end builds, this is yet another bonus feature that shows how much engineering went into this case. The fans connect to one another using a plate to plate method, the final fan has the wires to plug into the motherboard or controller. The rgb lights on these fans are also unique in their design, utilizing clean lines but also the mirrored sides. When you see these fans you can’t help but exclaim “wow” because with the organization that you get from this case, the fans can be seen in all their glory. No wires blocking the view what so ever. The rgb control is easy to use and easily combined with all other lighting on the pc.-another bonus feature many might miss seeing is the fact they include a gpu support, that is adjustable and is built into the case. This is huge for cards like the 5090. Simple, effective, absolutely fantastic. Just another way you can see the engineering that went into this creation of this case.-filters, this is something becoming common so it’s not unexpected but they do have them for all incoming air locations which many cases still lack. The bonus feature is how easily they can be removed and cleaned without dismantling anything.-access to the panels is excellent, they have thumb screws on every panel but also the glass is plug mounted on the front edge. So it pops off easily. You have easy access to every section via panels for front, top and back side. The thumb screws can unscrew entirely if you can leave them in the panel when they release from the case. This prevents losing if the said screws, another nice bonus feature that seems small.Many of the features I mentioned may seem small but they are not insignificant by any stretch. When you put them all together then you have much less of a headache being possibly caused by something small going wrong. I know I’m repeating myself here but with this case you can tell how much thought went into engineering every detail even the small ones that alone seem insignificant. They really focused on the little things here and I can appreciate that as a builder. I will absolutely purchase from this company again in the future.Note: I did need to contact the company to find the reverse fans for this case. The responded quickly and advised me how to obtain the fans I needed. They were eager to learn why thoughts I might have had about the case and fans, I imagine this is because when they design the next case, much like this case, they want to focus on the details that matter. So gaining my input helps them be more effective on the next design. I respect that from a company.As always if I encounter anything good or bad from this point on, I will come update my review accordingly. :-). No builder can go wrong with this case and dare I say, this company. I can’t wait to build my next rig, maybe I can do the white build soon.

This is the real deal for a "full tower." I'd been using for several months a mid tower which was nice but not getting enough air flow through it. Also everything was jammed in there and just looked goofy. I spent a couple of hours looking for a full tower case and couldn't believe how difficult it was to find one that was "A" big enough" and "B" didn't cost an arm and a leg. The dark flash case was the best value and as far as ascetics go....Look at the pictures. It lights up like a UFO. Not to mention the airflow is incredible. Now to be transparent this model only came with the one (1) back ARGB fan. I had to purchase two (2) sets of three fans (which they sell on their Amazon store) to get the desired airflow. Even with the purchase of the fans it was still a steal. The amount of space in the case is INCREDIBLE. Plenty of hidden wire management, the power supply is in a dual chamber and not visible (don't put it in backwards, make sure the fan is facing out), huge amount of glass that wraps around to the front, has a USB-C motherboard input (make sure your motherboard has one), the ARGB lighting effects are customizable (I use mystic light via my MSI board) and again the space is monumental. This is hands down the best Full Tower Case I've every bought. Comes with a nice screw kit in a reusable plastic box and it's incredibly easy to put all your PC Components in, it just takes some time if you buy the extra fans and how much equipment you've got on your motherboard.Again, hands down the best Full Tower Case I've ever purchased. Can't stress enough how much room is in this dark flash tower. DEFINITELY worth the buy.

The media could not be loaded. I've had cases from fractal design, Corsair, and cooler master. The build quality is on par with leading brands. The glass is thick and nicely tinted on the black model. Plenty of space in the back, 360 rads go in without much issue.The airflow depends on your fan setup. Id say at least for pulling in and 3 pushing out. I have 5 intake and 4 exhaust. So it's a hurricane inside there. No issues with cooling.Watch out for that front glass panel. It has two inserts on the bottom that requires you to lift it up and out. That wasn't clear at first. The front panel is secure but at the cost of being a bit difficult to take off. I would also like the wire pass throughs to be slightly wider. It would have made building quicker.It's a great case at a good cost if opt for the single fan version. I'll be watching the darkflash brand.

This is the best pc case I’ve ever. It has a lot of room and good cable management and the fans work great and look good. The option I chose came with 4 fans (3 reverse intake fans and 1 exhaust fan) this option did take a while to be delivered but definitely worth the wait. The one down side is if you want additional 3 reverse intake fans to match I don’t think darkflash sell them separately just yet.

The case is great, alot of space in the back for everything and if you're a bum at cable management it has a nice cover to hide all those argb rats nest of wires. The case is rather massive, I was dreading moving all the guts from my old case but honestly there's so much room to get to everything it was quick. If you enjoy building pcs this case was alot of fun.

Love this case! Looks so good on my desk! Lots of room for cable management!

Lots of space and easy to look clean. I see a bay for hdd but haven't found anything for ssds. The fan that it comes with isn't true color, it doesn't match the color at all.

Love this Case!!! tons of room, fits my Arctic Freeze III AIO 360mm cooler no problem! great case, great value