NeatiEase 10 Pcs Metal Roofing Panels, 5.1 Feet Corrugated Galvanized Roofing Panels Metal Siding Panels with Steel Screws for Pergola, Gazebo, Shed, Outdoor Storage, Chicken Coop, Patio,Garages

Easy to install. Good quality and it was nice that it was delivered.

I wanted to add on to a Veikous carport I put up last year, and these panels at the 61.4" length are mostly identical to the panels included with the carport, aside from being about 2" shorter. (And the color—these are a much lighter shade of gray—but that can be fixed with some spray paint.) The length still provides enough overlap, so for this purpose they work well.The protective plastic film that some reviewers mention can be annoying to remove, but here's a tip: wait for a bright sunny day, and leave the panels spread out for a while so they absorb the sunlight. If it's hot, be careful because the panels will get too hot to touch without gloves. Start with one corner at one end, and pull down about 1" of plastic while working to the other corner. If the panels have heated up enough this should be pretty easy to do. Then grasp the plastic at each side and pull straight down the entire length of the panel (it's a little easier if you can get someone to hold the panel upright while you do this). After a couple of practice runs you should be able to pull all the plastic off in one go, and it takes a total of maybe 2 minutes per panel. I just came in from a sunny 60°F day and it was warm enough for this technique to work perfectly.

I purchased the 10 piece 61 inch by 18.8 inch metal roof sheets. It is as good a product as I have ever used. The metal sheets are thick as described (non-flimsy) and accurate as to size. The two sides overlap their adjoining sheets which keeps almost 100% of strong wind from getting under the metal roofing. I, a retired financial advisor, installed the roofing single-handedly over two days. Following my typical thorough research, I purchased this product for $159 while a comparable product would have cost me $800 to $1,000 for the same number of metal sheets (10).

Screws did not come what type and size do I need

It is a good product, but the 6.1-foot-long panel is no longer available. I have been waiting for this 6.1 feet size panel for over three months, but it is still not available.

Not enough screws, resulted in work stopage! quality ok, had to re-write review for telling like it is.

Perfect for what I needed..porch roof

Here's a revised version of your experience with the NeatiEase Metal Roofing Panels:I recently reroofed my 12x12 chicken coop using the NeatiEase Metal Roofing Panels, and I'm quite pleased with the results. The galvanized steel panels were easy to work with, and I appreciated their weather-resistant properties. Since they're 6 feet long, I didn't need to cut them, which made the installation process even simpler.The panels are on the thin side, about 25 gauge, but for a small coop like mine, it's perfectly adequate. I was able to mount them quickly using the included screws, and I didn't need any specialized tools.I'm impressed with the versatility of these panels. Although I used them for my coop, I can see how they'd work well for various outdoor structures. The 12-month warranty and 30-day return policy also gave me peace of mind with my purchase.Overall, for small projects like chicken coops, these NeatiEase panels are a cost-effective and practical solution.