VEVOR Portable Car Lift - 7,000 LBS Capacity, 26.8" Max. Height, Heavy-Duty Carbon Steel Truck Lift with 120V Power Unit

Lift came nicely crated with all parts wrapped and secured within. Pump unit seems pretty heavy duty and has a sight glass to easily see when the hydraulic fluid is full. Hydraulic hoses and quick disconnect fittings also appear to be good quality. The lifts themselves are very heavy duty. Setup was simple and the air bleeding process was quick. The safety locks, two on each side, worked great. They engage automatically and are simple to disengage when you are ready to lower the vehicle. Within 30 minutes I had my vehicle up in the air and the tires rotated. With the height adapters I got the vehicle above 24" off the floor so there's plenty of room to work on, under and around the vehicle. This makes maintenance so much easier.

My garage is a mess, dont judge. This thing works great. I've only had it 48 hours, as of 4/16/2025, but I've used it on 2 different cars. Lifts them smoothly and supports them well. Definitely a great purchase if everything continues to work well. If it doesn't, I'll update my review with the issues. All the negative reviews about it being heavy, it's true, but it's heavy because it's solid. I don't want to be underneath a vehicle held up by something cheaply made. I tried to shake both vehicles while lifted and they wouldn't budge. My only complaint was the carrier, Ceva Logistics, held the item an hour away for 5 days. Not the sellers fault at all.

This lift comes in one large crate. Everything is packaged nicely. The hoses and lifts already have the fittings on them. The extenders and wheels are not assembled. I did not need to use the extenders on my Tesla model 3. Both of the lifts had the threaded inserts misaligned where the wheels attached and I was unable to use them because of it. Overall, it took longer to unpack everything than it did to set up the lift. It comes with both lifts, hoses, extension plates, a couple types of lifting blocks, and the pumping station.The lifts are extremely heavy. I considered wall mounting them until I tried moving them around. Needless to say they’ll stay on the ground. They were easy to setup and instructions were decent. I used ATF fluid. The manual lists an oil quantity larger than the reservoir. Just look at the sight glass on the reservoir and fill it up accordingly.Pros:This lifts the car vertically- not up and back like other brands.There are 4 locking points that feel solid.Easy setup, mostly assembledDecent amount of lift with plenty of clearance.Cons:It weighs a lot. One person can drag it around but you’ll need at least two people to pick up the lifts.There isn’t an air cylinder to retract the lift to flat like other brands. Once the weight of the car is off- I usually just press on the lift with my foot and it will lay flat again.My lifts had misaligned threaded inserts for the roller wheels. I decided not to use the wheels and just drag them flat.

Excuse the mess my adhd makes a mess. This lift is amazing and worth every penny!

Used 5 times then it failed to fully to go up and lock. then we serviced it and it locked up at full height. Contacted the manufacture they refused to help in how to lower the units. They insisted in us telling them where we bought the units before they would provide any customer service. Also disappointed in that it will not safety lock in any other position except full up.

The unit is heavy and sturdy, but you need to know where to jack up your vehicle. It goes up quick but goes down really slow, especially when there is no load. I added 1" ball bearing roller to the bottom pad so it can be moved around a little easier, fowwing one of the review videos. I jacked up my Subaru several times to test it and it seemed to be pretty steady.I took one star off due to pooooly written manual and no instruction on how to properly bleed the system and how to verify if the bleed is successful or not. And also, according to the manual it needs 3.8L oil. Yes, If the lift is raised all the way up (pass the second safety lock), 3.8 L oil is needed, but when the lift is lowered, the oil will overflow. They obviously thought about oil capacity for going up but now down.I took another star for missing all the bolts. Their tech support wanted me send them the pictures. How on earth could I give picture of missing parts? But they agreed to send the missing parts, supposedly to arrive in two weeks or so. We will see.

This damn lift has been the best garage purchase ever!!!! I love my lift and it has helped so much when working on my cars! It can handle the stress and the stays up in the air. I have left it with a car on it for about 2 weeks with no leaks, and no signs of lowering. It’s super easy to use and is very straightforward to setup! It’s super heavy though so be prepared to have help if you’re not able to lift heavy weights. It’s very sturdy in design and simple. Honestly really enjoy having it in my garage!

First off... these suckers ARE HEAVY!! I'm talking 200lbs a peace. So make sure you have someone to help you move therm or a dolly or something. Works really good, when all the way up the locks do engage and hold the full weight of the car or truck, however I still recommend using jack stands for safety