VEVORPortable Car Lift, 7,000 LBS Capacity, 26.8" Max. Height, Heavy-Duty Carbon Steel Truck Lift with 120V Power Unit

I bought one of these vevor 7000 lifts. And when I wanted to raise platform up it would not go up so tried contacting vevor no phone# you have to text them a message. They will send you a video on how to bleed system. Remove the 2 bolts on handle, look strait down were the handle was that you removed you will see a 7/8 bolt that's the bleeder bolt, you will have to remove the 2 bolts under the unit to remove the cover to get to bleeder bolt, fill unit aw 46 or iso 46 aw- anti wear- I used aw. When bolt is removed hit the up button on remote and let some fluid out about 4 ounces. Put bolt back in check fluid meter add if you need to. Press the up button and it will go up but don't go past 12 inches, now put it back together. Don't go past 12 inches only because there's no weight on lift if you go to the top lift will be stuck in that position the reason is from ground to 12 inches there's no weight that's were lift goes flat only not at 18 or 20 inches. Mine goes flat but you have to keep and hold down button for at least a minute or two. I was frustrated, went to youtube. Even more frustrating. I hope this helps. Vevor needs to update customer support. No phone# you can chat with them. Send email and get there bleeding unit video.

Work until you need parts. No parts available. Typical made in China crap. Buyer beware

Ordered this lift after careful consideration and research. Arrived very well packaged in a wood crate. Assembly is very straight forward only needing to install the wheels and handles on each platform. The platforms are VERY HEAVY which is really the only thing negative I can say however the weight also adds to making the lift seem very secure. Take your time bleeding air out of the system and dont raise the platforms all the way without some considerable weight on them. Very difficult to get to lower without weight.Overall very happy with this lift.

I'm very happy with this. I was worried it wouldn't lift my pickup truck. But it lifts it with no problem. The only complaint I have is the nuts holding the wires to the control box were loose. But I just opened the box up and tightened them

Very heavy and one wheel broke off but solid chunk of metal.

Bolts supplied for the transport dolly wheels were too short, barely had enough threads to get them started. Was not able to tighten them though.Had to purchase longer bolts to attach the dolly wheels. Not convinced the blind nuts are the best method to attach the dolly wheel bolts. I had two of the eight nuts start to spin and would not properly tighten.Everything else is good with the jack

solid and works well, easy to set up and use

Haven't been able to use it, still trying to seal the Disappointed when it leaked fluid on my shop floor.would not recommend this lift to anyone, BEWARE! DO NOT PURCHASE FROM VEVOR.TCar lifts are total JUNK! AND CUSTOMER SERVICE IS A BIG JOKE.AMAZON SHOULD BAND VEVOR FOR SELLING JUNK.To there loyal customers