ZSHINE Curtain Single Tracks Ceiling or Wall Mounting Heavy-Duty Curtain Rails for Living Room Bedroom Room Divider (Black, 6.6ft)

Mounts well. Cuts well. Union pieces included, however, they are fairly weak and do not entirely align the sections.Trolleys are smooth and seem to handle a bit of weight

Purchased this product to section off one bay in a three car garage for a shop. 20ft in length. looked at several options and this one seemed to be the best quality. The packaging is suspect but the rails come covered in tape to prevent scratching during transport. The rollers were my biggest concern and ultimately what led me to this product. If you look closely, most companies sell rollers made from all plastic. This company makes theirs out of metal with a plastic covering. Overall assembly was easy. You screw the clips into the ceiling and the rail clicks in place. Make sure both sides are engaged. Also comes with wall mounts.Note that the rails come in sections that attach together. This is not an adjustable length like a curtain rod. So if you have a nonstandard length, you will need to buy more and cut to length.One caution is that the rail connectors are flat, made of aluminum, and attach to the rail with set screws. Not super secure. I first attempted to lift the entire rail to install and the connectors immediately bent in half. Thankfully I had extras and just installed in pieces next time.

Needed strong track for heavier drape. My application was for a 13’ ceiling mount room divider. This track will easily support a heavier upholstery weight drape. Very nice and worth the extra investment.

Very bad instructions. It took 3 attempts to figure out how to mount this track on my own. I strongly recommend that you attach the mounting clips to the track before you attach to your ceiling or wall. They slide once attached, so you can move them as needed. The coupling plates are a bad design. I suggest attaching the coupling plate to 1 piece only. Then you can slip the next track in place after the first track is mounted. Or ignore the plates all together and simply abut the tracks tightly next to each other. Either way will work. Once they are in place, they are awesome. They do scratch easily so caution is the word. Sturdy and decent quality.

This system worked great for a tight inside mount on a 16' wide Pella sliding door. Used aluminum tape wrapped around bottom and sides of the joined track sections to stabilize the two 8' long tracks we constructed, then removed the tape after clicking the tracks into the mounts. This prevented bending the top clamp that other reviewers have complained about. The rollers are extremely smooth, so the two 8' long by 8' high velvet drapery panels we installed glide effortlessly. The 18 small rollers we used per side stack to just 12", therefore the view is minimally obscured when the drapes are fully opened (and we will probably use tie backs--don't want to waste any of our beautiful view). Overall, this product uses high quality materials and is of excellent design!

First order had no hardware whatsoever, only the rails. Reorder had most of the hardware but was missing the end caps. I am in the middle of getting the missing end cap issue resolved. I cannot recommend purchasing this item unless you don't care if/when you can install the product and you have the time and patience to resolve issues with your order.

This is such a fantastic curtain track! This is a major upgrade compared to the popular Swedish brand that you can buy in the maze store. I had the those tracks and this one takes the same idea and makes it easier, quieter, and far more seemless. With the ZSHINE tracks, we no longer hate opening/closing our curtains (which we did, because our old ones were noisy af and had to be yanked the whole way down the track). This one doesn't get stuck in the joins since there are plates to connect the tracks, and because there are wheels on the gliders, it's super quiet and smooth. It was so easy to install, just make sure you do a better job at measuring than I did - the slightest variance of the ceiling mounts being out of line will make popping the track into place much harder. I ordered one set of tracks to try this out and ordered a second right away. I cannot stress how much better these are than the other popular white curtain track system, and you'll spend the same amount on that one after ordering all the parts that their system requires; the ZSHINE system gives you everything in one box. It's well packaged and you don't have to pick between ceiling vs wall mounts; both are included. The only thing that I wish was different is the type of screws used for the joining plate - I have mine ceiling mounted, and if the join comes apart a little while you're popping it into the brackets, there's really no way to fix it other than taking the whole thing down. If the screws had a head and could be adjusted with a small, flat wrench, rather than a top down philips head, that would resolve the issue. Still, if your space is not super long, or you aren't ceiling mounting them, you shouldn't have an issue. If you're looking for low profile, cost effective curtain tracks, this is the product to buy!

I had to exchange for another set when I was sent one with missing parts. The second one was also missing parts. I then realized that the first one I was sent even had a small section of the track cut off. Be sure you check the contents when they arrive. I was able to combine parts from two sets to make the complete track system, so it worked out. Now that they’re up and complete, they’re pretty amazing. I used them for a sliding door and ceiling mounted them. Now we can slide the curtains completely to one side (without a center support in the way, like we had with a standard curtain rod.) I recommend them. Just be sure you get everything you need!