KPx Thermal Grease 30g

Easy to spread, won't crack under negative temps, and I mean what else could I put on a kingpin card in a kingpin build 🤓

Very happy with this purchase. Paying this much for thermal paste is very much a worthwhile investment. It's helped me to tame the 4090 with a 20-22c delta whilst pulling 430-450w. It is far more viscous than I thought it would be which made spreading it easier. It's only been 4 days and I've come across a a Youtube video of how this stuff doesn't perform well after 6 months. So if this is the case, I'll update my review but if this remains unedited, assume all is well and that I recommend this thermal paste. Edit - 5 Months later By delta I mean liquid delta, ambient room delta would be nice though. Temps are about the same. Taking the average from HWiNFO64 and the water temps after 30 min where I sat in CP 2077 in a spot that is very GPU heavy and draws 410-440w. Simulated it all the same way as much as I could, CP 2077 has been updated a few times over the last 5 months but the power draw was pretty much the same and the taxing of the GPU which seemed to be similar and the delta was 22c. Whether it's due to how I or they applied the thermal paste, whether they got a bad batch or if it's due to them possibly living in a dryer climate (I'm in the UK), The GPU has gone as high as 530W for a few seconds, had a lot of high and low temperatures through different games and different parts of the map, multiple 3DMark tests, times when I have just relaxed after a long day/week/month and consumed YouTube whilst browsing Amazon, FB, Etc, so the thermal paste has certainly been through a lot of different and in some cases rapid temperature changes in these last 5 months. Not sure why someone else's results would differ so wildly but I am thankful that I never had to experience what some few others have.

My first assumption was there was a lot of hype about the “Kingpin” brand thermal paste so of course I had to try it. I have worked with hundreds of different thermal pastes over the 20 years I’ve been an IT Administrator and building custom gaming rigs as well as servicing laptops, graphics cards and everything in between. At first I thought this paste was a little on the thin side. However it spread really easy using either the blob in the center or using the included spatula. Use whatever application method you choose as it makes no difference in performance AT ALL as long as you don’t use too little. Too much only makes a mess but does not in any way harm performance like everyone would want you to believe and since this paste is non-conductive there’s no risk of causing a short. So now to the tests. So I put the the KPx up against some well known pasta such as Thermal Grizzly Kryonaut, Corsair TM30, Noctua N1-H1, Thermaltake Master Gel Pro, and ZF-12 thermal compound and it held its own! It performed identically to the Kryonaut while outperforming the others by 5-10deg C. So I was pretty impressed with the performance but not the high price. BUT I guess if you want the best your going to pay for it! However in most cases a cheaper thermal paste would be just fine unless your working with higher end CPU’s and GPU’s. OR you just want a high quality thermal paste you can set and forget! However for most enthusiasts we change parts like we change cloths so I personally go thru ALOT of thermal paste! lol So all in all this was a great thermal paste and worked fantastic.

Amazing thermal paste. I used it on both my CPU and GPU water blocks, keeps temperature down a few degrees lower than other thermal paste.

One of the best if not the best thermal paste on the market Spreads super easily ,the best temps for your cpu