Supreme Suspensions - 2" Front Leveling Kit for 1994-2013 Dodge Ram 2500 3500 and 1994-2001 Dodge Ram 1500 4WD High-Strength Steel Coil Spring Lift Spacers Kit

well built, easy to install, works as described! Would recommend to anyone who wants to level the front of their truck. Ride quality was not compromised in any way with this kit!

Strong product! True 2 inch lift. Read directions to the letter. Rubber isolator stays and 3 ring bolt goes in trash. Put on my 3500 ram in 2 hours fit perfect to level truck. Going with 34 inch tires should have lots of room. I used a spring compressor. The passenger side is impossible with out it.

Wasn't too difficult to install them and love the way they look. If they would make them with a spring shoulder on the outside edge I would have rated them a 5*. If you don't have knowledge on working on vehicles I'd advise a professional installation.

Shipping was fast and the product was pretty good quality for what you pay. Instructions aren’t that clear but if you have mechanical knowledge it’s pretty straightforward. I would highly suggest renting a spring compressor as I Diddnt and I fought the springs for the longest time ( probably 3 hours) everything else is simple. The only thing I would change would be to incorporate some kind of lip on the bottom plate where the spring sits so it stays centered. My old rubber boots were dry rotted and no longer useable therefore my spring likes to get cockeyed towards the top end. Not sure if this will effect driving in any way or your alignment. It won’t fall out due to the center of the leveling kit being a good inch lower and the shock running through the middle. But it would be nice to have it sit where it should be. Thanks.

Supreme Suspension company has never let me down I’ve put on a fair amount of there products. Quality is always exceptional, price point is perfect. Plus you get coozies and stickers who else does that?

The install is pretty simple. Spring compressors are a must. You need to disconnect the sway bar to get the most drop out of the axle. Disconnect the bottom strut bolts and that will release the axle. Now remove the three strut tower bolts and leave disconnected. Remove the bolt plate you don’t need it. Remove the spring and compress it. Put the new level Mount through the strut. This is where another person helps. Slide the spring over the strut leave the top disconnected so you can move it around this helps a ton. Once you have the spring in tighten down the three top strut tower nuts and remove spring compressor. Do the other side and put back together. All together as long as you have a good impact and other tools should only take 4 hours max. Good luck!

Welds had a bit of undercut but would no way affect their strength in this application. Seems to have a nice finish to them and the extra stickers and key chain are a nice bonus. As some said you may need a spring compressor or put a bottle jack between the axle and frame to get the axle far enough down. They do what they are supposed to and don't break the bank. I'm happy. You'll be happy too.

Good quality well made. Went with 3.5" coil spacers on 2nd gen Dodge ram 1500 sport 4x4 took a little time to install but the finished look is great. Stock shocks fit maxed out will need longer shocks and all stock suspension fits nicely no major issues with alignment done. Have had them on around 300 +miles now still holding up great all fasteners and welds solid on spacers.

WILL clear 35x12.5 tires with this 2" kit so long as you get a plus 18 offset rim or the stock rims. No rubbing. Bought this with the moog 2009 steering upgrade. Installed both at the same time on my 2003 2500 cummins. Just a basic steel spacer. All holes lined up fine and all welds were fine. Install is much easier with a set of helping hands. If you're doing it by yourself a spring compressor would be a good idea. Shipping was a bit slow but I was in no hurry.

Everything went in place with no problems everything installed and cleaned up less then 4 hours.

It's a good product but did not provide the clearance for 35" tires. I got the 3 " levelling kit and much to my chagrin the 35s rubbed. I was sure it said in the ad that they wouldn't but I'm looking into that now. Still a good product tho

Works good, box a little beat up, but other then that good quality parts