Rugged RidgeRugged Ridge Door Hinge Kit | Black, Steel, 4 Piece Set | 11202.01 | Fits 1987-1995 Jeep Wrangler YJ; 1997-2006 Jeep Wrangler TJ; 2004-2006 Jeep Wrangler LJ

Description says they fit half and full doors from 1987- 1995 but they are too short

I don’t typically write reviews but I feel in this case it is necessary to help out anyone else who happens to order these items. I ordered Rugged Ridge 11209.02 Black Windshield Hinge, Rugged Ridge 11202.03 Black Lower Door Hinge - Pair, Rugged Ridge 11202.01 Black Door Hinge Kit and Rugged Ridge 11202.07 Brass Hinge Bushing Insert. I will be copying this review to each as each part is integral to the story here.First, the windshield hinges come with bushings but the lower door hinges don’t. This isn’t stated anywhere I found and the bushings come as a set of 4 so you will have 2 extra.Next, the bushings don’t fit inside the lower door hinges. I contacted Rugged Ridge and they say they should. I drilled out the inside of the hinge opening with a 7/16 drill bit and they fit fine after that. That leads to the next problem.The pins on the door hinges don’t fit inside the bushings. Again, Rugged Ridge says they should but they don’t. The issue was the powder coating on the pin. I tried using high quality paint stripper that was stated online would work on powder coating but it really had no effect. Since it was just the pin that was the issue we sanded some off and that worked easily. Eventually we just used a pocket knife and scrapped the powder coating off the pin which worked just as well as the sand paper.Once we got through all of that, the parts worked well together and look great. I hope this information helps someone else along the way. I don’t regret buying the products, I just wish I had been able to find all of this information a little easier. Good Luck.

Muy bueno

Nice finish, easy to swap over, hardware is useless, wrong thread!

They fit fine, but I had to scrape off the powder coating from the pins. You will probably have to run a 1/4-20 tap through the mirror attachment holes to clear out the coating as well. Not sure why, but I got also 2X the needed bolts.