KF04060BK Body Mount Bushing Kit for Ford F250 F350 Super Duty 2008-2016 2WD 4WD Polyurethane Body Cab Mounts & Steel Sleeves & Hardware (Black)

Would fit my truck so I had to get some other items.

I’ve bought 2 sets of these one for a 2008 and one for a 2013 they are probably stiffer then the factory rubber but I dont drive a truck for the comfort so they do what I need them to do

OK for the price but the rubber is much harder than the stock bushings, the hardware isn't the best. when removing the originals make sure to use plenty of penetrating oil and resist the urge to use an impact wrench especially up north where there will be rusted nuts where it will be very difficult to access. Do one side at a time.

Couple of tips and tricks after doing this - 1. heat each bolt to break free the Loctite on the other end with a propane torch ~5 minutes (don't catch on fire - too much!). Torch is very easy to obtain and works great for campfires too - pencil torch and a common green Coleman tank. 2. Radiator mounts - hold both ends of the hardware on this one. (We waisted a lot of time with impact wrench and as soon as we held the other end - bingo it was removed.) Plan to spend 5+ hours to do all. Would have taken me much longer if my kiddo was not heating bolts and being the gopher while I was under the truck. All-in-all great product for the money!

This Product is not worth all the trouble just to change them out again. They squeak too much and they ride is very hard. Definitely going get the better ones and spend the money. Which I should done in the first time instead of trying to save money. Some things you can't go cheap!!

Good product Great price

Giving a 3 to be generous. First off, they work and fit fine. They are of good quality for what they do. However, they are nearly rock hard. If you value your ride quality these are not the answer. They would be great for a mud truck or something like that but you can feel everything in the pedal, wheel and seat. These make your vehicle incredibly rough. I ended up spending the extra money and buying a set of the silicone mounts and they made a world of difference. The second issue with these is that they trap water and will eventually rust the bolts out. When I pulled these off to put the silicone ones on, water came out of several of them. The new silicone ones have a double o-ring on the stem that prevent this. Overall they work but spend the extra and get a good set of cab mounts.

Better than oem