600 Pieces Glue Applicator Plastic Bottle Tips Glue Extender Precision Applicator for Crafting, Lab Dispensing, Adhesive Dispensers - 4.7 Inch

I bought these to work with standard nail-glue tubes, like the glue to stick nail-caps on cats. It works great! I replace nail caps on my cat every few days, and felt like there weren't enough glue tips provided with any of the glue. I've gotten 10 uses out of one glue tube so far, and still going strong. I cut these glue micro-dose tubes down to a size that fits into the nail caps. This bag may last me 10 years at the rate I'm going! Such a great purchase!

These work great and I got what I feel is a good deal on them. The tips that slide over my glue bottles are very snug which is nice. I cut the tips back a little to make them shorter when applying a fine amount of glue. Just be sure when you are done using your glue to allow the remaining glue still in the tip to flow back into the bottle.

These little buddies can be easily cut to fit or jam onto most small craft-sized glue bottles. I do rc things, diorama things, scale things, so I use a variety of cyanoacrylate adhesives, and, if you know how much those cost these days (2P10 and activator cost more than some of my cheaper rc cars!!), Then if you can split 1 drop into 6 or 8 or more, well then, one use of these will save you 4x, 6x, etc of adhesive purchases. Also, due to the small surface area of the end of the proboscis the adhesives do not seal them shut. So they act as a superior lid as well. Absolutely stoked I bought a boat load of these!!

Am very pleased. Works like a pro.

Exactly what I was wanting works perfectly for what I am doing

This lets you use even the thin fast setting superglue and be able to put just a tiny drop where you want it. Anyone who builds models needs to have these.

I ordered this product to use with those small tubes of nail glue. There are more (600) than I wanted but I found no smaller amounts. I will have some for probably years. They attach easily and perform as expected...to keep that nail glue from spilling over or dispensing too quickly.

Exactly what you need for modeling. So easy to make it shorter for micro control of glue application if needed. Especially in those hard to reach corners on some models that somehow are missed when first putting it together. They have 3" of micro tubing on top of the 1/2" of normal glue end plus the end that goes on the glue tube. So you have 4-1/2 total length.

Una maravilla al mejor precio que encontré

all good