Bostitch Hardwood Flooring Cleat Nailer

So far I have used this to install 200 square feet of flooring and I did not have any problems. I only misfired 3 nails two of which were the first two nails I fired with the gun. I do have some experience with the lower cost hardwood floor nail guns. While they did not misfire into the wood very often in my experience they do tend to jam, forcing you to stop working, disconnect the gun, and clean it out. I am very happy with my purchase and I plan to sell the gun used when I am finished the other 300 square feet I need to install. Resale value on this nail gun is very high, making it more affordable to buy the gun then rent it. Update -I have finished my project and the nail gun worked flawlessly throughout all 500 square feet of flooring. I did not have a single jam in the gun, and I only had to rip out a few boards for misfires, all of which were most likely my fault. I also was able to work on my project over a month which I could never had done if I rented a gun. I plan to rent my gun out to two friends so they can install hardwood in their homes and then sell it used. I may even recoup all of my costs back. Update 2 - Started on my second project, about 500 square feet of flooring at my friends house. He did have a lot more misfires then I did, however I was not the one using the gun. I feel he was not hitting it hard enough. Also we did have our first jam. The gun was relatively easy to take apart and unjam, just 3 hex bolts. So overall it has fired about 2500 nails thus far, there have been about 50 misfires (90% of which were the fault of the user) and one jam. Not bad I think.

Bostitch flooring nailer is a reliable product and easy to use.

Exactly what I needed. Just works.

I recently bought this nailer to install 3/4" brazilian koa over 3/4" osb. The first thing i noticed is that the nailer includes a foot piece for the nailer called "adapter for factory finished flooring". This piece is not shown in the pictures but is a very handy addition as it allows you to move from strip to strip (there are small rollers on the bottom of the foot) and tap the strip into place by hitting the foot piece rather than the strips themselves. The instructions are complete but somewhat opaque. Once you know what they want you to do the instructions are apparent in their intent. For instance, the foot can be installed in either of two orientations - I, of course, had it backwards at first. The irritating thing is that the nailer works in that orientation as well.... just not very well. The handle should be longer to allow a more upright operating position. One could readily craft a longer handle as it is joined to the body of the nailer by a very simple "L" bolt (NOT "U") arrangement. Note that you will need a 3/8" x1/4" (nipple diameter) male air inlet to connect to your air supply-not the more common 1/4" diameter threaded piece.

I just finished putting in a 3/4" solid oak floor in a 12'x15' bedroom/office. This tool worked perfectly the whole time, even though I only used a 1/4" fitting, versus the 3/8" fitting recommended in the manual. It sank the 2" nails to the perfect depth every time, never jammed, and shows no wear from the job. (The face of the mallet that came with it shows some wear, but can be replaced.) For use, I recommend good, hard swings of the mallet, as this helps set the boards before the cylinder activates and shoots the nail. Be careful not to screw up like I did, (twice), by letting the tool rest on the board instead of on the tongue. I shot two nails into the face of the floor and had to get a Porta-Nail 42620 Flooring Nail/Staple Setting Tool to fix them properly. (It is worth buying one of those before you begin, too!) I expect to put wood floors in several more rooms, now that I have the experience, and paying a premium for such a quality tool is well worth it.

I bought this nailer in March From Amazon. I also ordered four boxes of nails. When received the nails had flopped around and broken open the box. I lost two boxes of nails worth over $20 apiece. No compensation from Amazon. It was a lousy packaging job. Using the nailer I installed 3 and 3/4 large bedrooms and it started to spit oil from the vents on the side of the cylinder. It worked a couple more rows and stopped working. It would get stuck on the wood and would not drive a nail and made a strange sucking sound. I researched this nailer before I purchased and all the reviews sounded great. What a bunch of bull. I saved about $100 by purchasing on line. Amazon will no longer allow me to return it after April. If I had bought locally I could have taken it back to the store. I had to rent another nailer to finish the job. So much for that $100 I thought I saved on line. I will also have to send it back to Bostitch and who knows how much the repair will cost. The Power Nail 445 that I rented is very nice compared to the Bostitch MIIFN and it is made in the USA. If I had to do this over again it wouldn't be Bostitch.

This is a super heavy duty tool that places like home depot and menards rent out to do it yourselfers who abuse the heck out of them. Why do they use this brand instead of a more expensive or a less espensive one? Because this is the industry standard and gives the most bang for the buck. It is also easy to service and service kits are available for $15 that give the tool a second life. It's basically a large single piston, so there is as few moving parts as possible. The only part not metal is the base, so it doesn't scratch the floor. It comes with a few bases for different floor thicknesses and a rolling slider base if you want to go that route. This is the only way to do a hardwood floor. One thing of note is you will need is a hand-held air tool like an angled finish nailer to toe-in pieces that are against the wall, because the piston is too long (all floor nailers are like this). You can use either end of the mallet to drive a nail. The hard end is for when you are closer to the wall, it lets you hit the piston at a 90 degree angle, so you can basically put the piston right up against the wall and drive nails. You need to toe-in about 2 rows of 2" flooring.

I installed 230 sqft of prefinished engineered 5" wide walnut flooring and this nailer made it an absolute breeze. It worked perfectly, zero jams, super easy to load, no marring. The only issues were with me either not hitting it hard enough or not properly lining it up or not realizing I ran out of nails. I used Bostitch's 2" L-nails and I purchased other items to go along with it as well. My contractor wanted $2k to lay the floor but I did it myself with about $400 in tools. The soft-blow hammer that comes in this kit worked nicely as well.

Simply the best that is out there,, can't go wrong with this ,, high quality,, and a very professional tool.

Disappointed in bostitch, the flooring nailer no longer comes with the wide composite base for prefinished flooring although that base is clearly shown in picture on amazon and bostitch websites. Instead you get the 3/8ntp air fitting. The CAN$600+nailer can only do unfinished flooring. The product got returned right away and shame on bostitch for the bait and switch scheme.

Smoking deal with hammer, way cheaper than loca

Fast shipping , great price , works like a charm l couldn't be happier!

Works great, price great, prompt shipping