🔗 Connect with Confidence!
The Ceker Push to Connect Air Fittings are designed for seamless integration into your pneumatic systems. With a 1/2" OD and 1/2" NPT male thread, these fittings support air and water applications, boasting a working pressure of up to 150 psi and a temperature range of 0-60°C. Made from durable nickel-plated brass and quality plastic, they ensure corrosion resistance and reliability in various environments.
J**T
Good quality part
Good quality part with good seal on 1/4" plastic tube. Only need one piece but was only available with a minimum of two. The price was good if you needed 2 pieces but a bit high for 1.
B**S
Worked
Worked
D**.
Works
Product worked as expected
B**E
Leak free
These are just the parts that I needed for my build, and they do not leak.
S**S
Worked with Aluminum pipe
Have a 2000 Central pneumatic compressor. 90 degree fitting broke cracked. I used this as a substitute. It didn't leak and held 120psi without any problem.
M**5
Read the description, not the photo.
photo shows 5... description says 2... need to be slower on the trigger and read... So yeah, my fault, but still annoying.
B**O
Does the job but some issues.
Nice looking fitting. Decent cost. I had two fittings to replace. First one went fair, but I had to remove hose to re-torque the fitting to stop leakage. Second fitting I have replaced twice. First time it leaked at both the thread and the hose ports. When I attempted to remove the hose I could not press the plastic piece enough to pull out the hose. This seems to be a common problem with these fittings. After I removed, I decided to replace the hose as well - as the old one was pretty chewed up at the fitting end and not enough hose to cut and reuse. This time I very carefully added extra teflon tape to the threads on an unused fitting. I tightened it very firmly and inserted the new hose into the fitting. This time, no leakage at the hose however the threads still leaked a bit. I tightened as much as I dared but could not completely stop the leakage at the threads. I am not sure the thread is exactly correct is what I am surmising.Pros: Reasonable cost, decent hose to fitting set up.Cons: Leakage at threads tough or impossible to stop. Difficult or impossible to remove hose once inserted (this is not necessarily a bad thing IMHO). Soft material. Began to round off fitting when really torquing it down to try to the leakage. I believe the thread is not cut perfectly to NPT specs.
A**O
cheap and they work
not a lot to say about fittings, only that they work and for this price…Nothing negative that I can think of. Happy with the product
C**K
Be careful. Not a good product and seller is falsely advertising.
Deceitful product description and quantity. Intentionally sends 5 pieces instead of the 85 advertised.Not even stainless and very poor quality.
P**T
Perfect fit
Perfect fit
M**U
Good Quality & the work Great
No issues using these. No air leaks.
D**N
Bonne qualité
Fonctionne très très
A**R
3/8 npt fitting for 1/4 air hose.
Great fit,Release work well too.
Trustpilot
2 months ago
1 month ago