Specifications: Supply Voltage: 13-18V DC Input Level Range: -40dBm~ -10dBm Operating Temperature: 0-40 Impedance: 75Ω ATT increasing key. If the incoming signal is too strong,(the thermometer-scales shows max and the signal strength value shows 99) it can easily be attenuated by enabling this "attenuation" funtion, it reduces the incoming signal to a lower level. There are four step attenuation totally. HOW TO CONNECT: 1. connect a jumper cable from the LNB to the "Satellite" port on the digital SATFINDER. 2. connect the cable from your satellite receiver to the "Receiver" port on the digital SATFINDER. NOTICE: 1. To avoid a continuous full scale reading, do not use the digital SATFINDER directly in front of the dish. 2. When using a LNB with gain higher than 60dB, insert a 5dB attenuator between the LNB/LNBF and the digital SATFINDER. 3. In case no satellite receiver is at hand a 13-18V DC power supply with F-connector can be connected on the "Receiver" side of the digital SATFINDER to power the SATFINDER. Package Included: 1 x Digital Satellite Finder 1 x User's Manual
Trustpilot
3 weeks ago
3 weeks ago
