Flowmaster Super 44 Mandrel-Bent Aluminized Dual Truck Exhaust Kit w/Chrome Tips for Silverado, Sierra, F-Series & Ram

2008 ram 1500 4x4 had installed perfect, cost $150.00 , sounds great good sound. My wife even likes the sound. Would bye again.

2014 F150 5.0. Good quality for budget minded. You need to have a little help from a regular shop guy to build this so it will last for years under your truck. Flowmaster has a great sound. Buy the set without the exhaust tips, shop for exhaust tips that you want and look good for your truck. If you cut out the resonator its gonna drone till your fillings fall out and then its gonna drone some more. You can buy an aftermarket resonator to replace the factory one. A 30 dollar glasspack does the same thing.

Out of the box, it wasn’t a perfect fit for my 03 F150 (which is stated in the fine print so I knew that going forward ) With a little tweaking of the pipes, installation was pretty much straightforward. The Flow-master 44 really made it come alive. Love the growl the 2 ½ pipes make. Sweet combination. Go for it…

I installed this on my 1995 F150, took about an hour. Plenty of hangers and clamps to get the job done. The chrome tips flaked a little after a couple of weeks, but they still look good and they sound great, gives it a nice tone, but not obnoxiously loud. I definetly recommend this

Installed on a 1999 Silverado.. everything fit pretty well, and was easy to install if you have some basic fabrication tools like a band saw and a welder for the exhaust tips. I had to cut my drivers side rear pipe to place the final bend further back to get the exhaust tips to line up.. I added a piece of pipe from the front that I cut off, and welded it up to get it to fit properly on my application ( could be because the muffler I replaced sits further back than the stock one probably did)… overall very happy with the quality

2006 Dodge Ram 1500.. 4.7 v8..This package is almost perfect for this truck. I had a single exhaust that came off the passenger side. It is now dual exhaust coming out the back and it sounds and runs great. There will be some slight modifications in terms of clamping/anchoring that you apply. You can get creative, But just go to auto zone and buy a couple extra C clamps 2 1/2 inch, and some tail pipe strap with the holes in it, and you can put this on with nearly no welding. The only welding I did was the tips. I highly recommended for Dodge ram 1500 trucks. Remember, buy at least 5 extra C clamps and you'll see why.👍

I have had this exhaust on my truck for 4 years and it is rusted through and needs to be replaced. I will not buy this product again.

So I would recommend if painting writing on the inside of the pipe what end go's where. I made that mistake. With my background in the automotive industry. It was a easy fix. The pipes were not thin cheep pips. Everything fit together like a glove. I did paint mine flat black. I also welded it together. Lot less to worry about. And I feel like you get a little better sound. Love it and will continue to buy exhaust systems from them!